Owner's manual
ULTRAFLEX
E
NG
L
ISH
POWER A MK2
-
page 7
of 36
1 PRODUCT DESCRIPTION
The system is made up of a series of intelligent modules which communicate via a
proprietary CAN bus. They altogether control the boat propulsion engines, and at the same time allow the
adjustment of the boat attitude stabilizers.
The user can control the throttle and the shift of the boat engine by means of the control station, which will
be equipped with one or two levers according to the number of engines on the boat.
The trims to control the attitude stabilizers can be located on the port lever (the only one in case of single-
engine boats).
CONTROL STATION
TWIN-ENGINE
WITH TRIM
TWIN-ENGINE
WITHOUT TRIM
SINGLE-ENGINE
WITH TRIM
SINGLE-ENGINE
WITHOUT TRIM
CONTROL UNIT
The boat can be equipped with maximum four control stations; the user will be allowed by the system
to control the boat using only one station at a time.
The system is always provided with a control unit used to carry out calibrations
and diagnostic.
The other components vary according to the application: whenever a mechanical interface (it may be a
throttle or a shift) must be controlled, a mechanical actuator has to be used.
MECHANICAL ACTUATOR
