UPT Series Easy Melt
Operation Manual
Version 1.2 3
www.ultraflexpower.com
1
GETTING STARTED GUIDE
1.1
SAFETY INSTRUCTION
1.1.1
IMPORTANT NOTES
1.
This manual is valid only for the Model and the associated Revision number(s) specified in the cover sheet of this
manual. A Change Page may be included at the end of the manual. All applicable changes are documented with
reference to the equipment Revision and Serial number. Before using this Instruction Manual, check your equipment
nameplate to identify your Model and Revision number. If in doubt, contact your nearest Ultraflex Representative;
2.
This document contains information proprietary to Ultraflex. All rights are reserved. No part of this document
may be reproduced, transmitted, processed or recorded by any means or form, electronic, mechanical, photographic
or otherwise, nor be released to any third party without the express written consent of Ultraflex;
3.
In this document period “.” will be used as a decimal point delimiter.
4.
Data subject to change without notice;
5.
All Information contained in this manual is the latest information available at the time of printing. The right is
reserved to make changes at anytime without notice. Ultraflex makes no warranty of any kind with regard to this
material and assumes no responsibility for any errors that may occur in this manual;
6.
Safety First!
YOU AND NOT THIS MANUAL ARE REPONSIBLE FOR ALL SAFETY
PRECAUTIONS
This manual is for reference purposes only. Personnel should be trained on proper operation of this equipment
before using. Only authorized personnel may perform any troubleshooting or repair on any ULTRAFLEX
manufactured equipment. Failure to comply will void warranty.
Please, contact the ULTRAFLEX
Service Department before servicing any ULTRAFLEX equipment.
Lethal voltages may be present in equipment surrounding and/or connected to this equipment. Read the following
warnings carefully and study this entire manual before operating the system. Failure to observe warnings may result
in equipment damage, serious personal injury, or death.
If the equipment is used in a manner not specified by this manual, the protection provided by the equipment may be
compromised and damage to the unit may occur.
1.
Only qualified persons who have been trained in the operation of this equipment and are familiar with the
technology should be permitted to operate the system;
2.
Installation, assembly, inspection maintenance and servicing are to be performed by authorized personnel only;
3.
Always have the Power Supply completely powered OFF and locked out before performing any service, inspection
or maintenance;
4.
Even with the Power Supply OFF, live voltages still exist within the cabinet. Always power OFF and lock out the
external power source to ensure no one can accidentally energize it;
5.
Ensure that all external wiring conforms to applicable codes;
6.
Obey all warnings and use good common sense;