Page 8 of 12
Operating Instructions
⚠
WARNING
Do not rely solely on the camera for obstructions while in reverse. Check your surroundings for
safety before driving in reverse.
The device may be powered by a 12 ~ 24 volt automotive battery or a vehicle electrical system.
Make sure all cables are connected properly to observe polarity. Improper cable connections
may damage the monitor. Remove the power cable connections when you do not intend to use
the camera.
After connecting wires, the backup camera will work directly when reversing.
(1) AV1/AV2
– For switching between cameras connected to the monitor.
(2) Decrease button
– For adjusting volume, brightness, contrast, language, and rotation.
(3) Menu
– For accessing brightness, contrast, language, and rotation.
(4) Increase button
– For adjusting volume, brightness, contrast, language, and rotation.
(5) POWER
– For turning the monitor ON and OFF.
(6) IR
– For receiving infrared signals from the remote controller.
