Page 6 of 12
Check for damaged parts before each use. Carefully check that the product will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
product with a damaged part.
Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with
the power switch is dangerous and must be repaired by an authorized service representative
before using.
Disconnect the power supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool.
Store the camera when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool.
Specific Operation Warnings
⚠
WARNING
Never use the camera near a bathtub, wash basin, kitchen, damp basement, swimming pool, or
similar area.
The monitor is not water-resistant. Do not submerge the monitor or expose it to rain.
Avoid dropping or striking this camera.
Avoid using the camera in enclosed spaces, areas with excessive vibration, or subject to severe
impacts.
Never puncture, scratch, or use abrasive cleaning materials on the camera.
Do not place cables where they may be pinched or stepped on.
Leave at least a 2" space between the monitor and walls, cabinets, or other objects to allow
adequate air circulation around the unit.
Grounding
⚠
WARNING
This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed
and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper
receptacle installed by a qualified electrician.
CHECK with a qualified electrician or service person if you do not completely understand the
grounding instructions, or if you are not sure the tool is properly grounded.
