Page 3 of 6
into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY CONSIDERATIONS
•
If mounting this product requires drilling holes, the installer MUST be sure that no
vehicle components or other vital parts could be damaged by the drilling process.
Check both sides of the mounting surface before drilling begins. Also de-burr any
holes and remove any metal shards or remnants. Install grommets into all wire
passage holes.
•
WARNING
: The vehicle should never be driven at high speeds if the lighbar is
magnetically mounted.
•
If this product is mounted with magnets, clean the mounting surface and dry it
thoroughly before installation.
•
Do not install this product or route any wires in the deployment area of your air bag.
Equipment mounted or located in the air bag deployment area will damage or reduce
the effectiveness of the air bag, or become a projectile that could cause serious
personal injury or death. Refer to your vehicle owner
’s manual for the air bag
deployment area. The User/Installer assumes full responsibility to determine proper
mounting location, ensuring safety to all passengers inside the vehicle.
•
Use only soap and water to clean the outer lens. Inspect and operate this product
regularly to confirm its proper operation and mounting condition. Do not use a
pressure washer to clean this product.
LIGHTBAR
USE AND CARE
•
It is strongly recommended to only plug 12V plug into a standard 12V power
port,
as cigarette outlets can become contaminated and not create a good
connection.
•
Do not modify the lightbar in any way.
Unauthorized modification may impair the
function and/or safety and could affect the life of the product.
•
Always check damaged or worn out parts before using the lightbar.
Broken parts
will affect the lightbar operation. Replace or repair damaged or worn parts
immediately.
