PAGE 10
OWNER'S MANUAL
SYSTEM OPERATIONS
VIBRATION MODE (2WAY REMOTE)
The 2way remote transmitter can be programmed not to beep and to vibrate only when a
command is completed. To place the system into Vibration Mode press and hold the Start and
# Buttons for 3 seconds. The remote will vibrate to confirm Vibration Mode. To exit Vibration
Mode press and hold the Start and # Buttons for 3 seconds. The remote will beep to confirm
that audible confirmation is turned back on.
TEMPORARY SHOCK BYPASS
If the vehicle is being parked in an area with a lot of vibration i.e. the airport or a construction
site, the shock sensor can be temporarily turned off to prevent false alarms. When Locking/
Arming the alarm press and release the Trunk Button within 3 seconds of pressing Lock/Arm
Button.
This feature requires that the user must be fully aware of the operation of this feature. If the
system goes into full alarm the remote will no longer function until the Anti Carjack Feature is
disabled.
Type-1
- The timer will start if the door is opened or if the # button is held for 3 seconds while
the ignition is on.
Type-2
- The timer will start if the door is opened or if the # button is held for 3 seconds while
the ignition is on. The timer will also start every time the ignition is turned on.
ANTI CARJACK ALERT
When programmed the Anti Carjack timer is triggered when a door is opened or the key is
pressed on the remote while the ignition is on. Type 2 Carjack Mode will trigger the timer with
the door and trunk button as well as each time the ignition is turned on.
If Anti Carjack is triggered, there will be no indication in the first 20 seconds.
After 20 seconds the LED will begin to flash rapidly to indicate that the Carjack feature is
active. After an additional 20 seconds the siren will then start to chirp each second for an
additional 20 seconds.
The alarm will now activate, the ignition will interrupt, parking lights will flash, and the siren will
alert indicating trouble. The lights and siren will pause momentarily between each one minute
cycle, and repeat until disarmed.
ACTIVATING ANTI CARJACK MODE (International Model Only)
U500/U550
PAGE 11
OWNER'S MANUAL
SYSTEM OPERATIONS
ANTI CARJACK DISARM
To disarm the Anti Carjack Timer, Press and release the valet button. Also Turn the ignition key
off before opening the door to avoid triggering the Anti Carjack Feature.
To disarm the Anti Carjack alert process during the lights and siren cycles, turn the car off then
on, then press and hold the valet button for 5 seconds.
SERVICE/VALET MODE
This feature will disable the remote start and security features of the system. When in Service/
Valet Mode the Lock, Unlock, and Trunk features will still work. The system MUST be put into
Service/ Valet Mode whenever any work is to be done on the vehicle, or if parked in any
enclosed/ partially enclosed area. This procedure can also be used to disarm the alarm if the
remote is lost or damaged.
ENTERING SERVICE MODE
1- Turn the key to the “ON” position.
2- Press and hold the Programming Button located on the antenna (mounted on windshield) for
8 seconds* or until the horn/siren honks/chirps 5 times.
*If programmed for Secure Valet hold Program Button for 15 seconds rather than 8 seconds.
The system is now in Service/ Valet Mode. (The 2 way remote will display Valet and Zzz Icon.)
To confirm this, the LED on the antenna will turn on solid, if a start is attempted you will get a
VALET (3 Flashes) diagnostic code from the park lights on the vehicle..
EXITING SERVICE MODE
1- Turn the key to the “ON” position.
2- Press and hold the Programming Button on the remote starter antenna (mounted on
windshield) for 8 seconds* or until the horn/siren honks/chrirps 2 times.
*If programmed for Secure Valet hold Program Button for 15 seconds rather than 8 seconds.
Service/Valet Mode is now off. (The 2 way remote will turn off Valet and Zzz Icon.)
To confirm this, the LED on the antenna will turn off or flash if the system is in the locked
position. The vehicle can now be remote started and the alarm functions will be active when
U500/U550
