background image

PAGE 8

OWNER'S  MANUAL

SYSTEM OPERATIONS

LOCK/ ARM ALARM

 Press and release the Lock Button to lock the vehicle’s doors (if door locks are connected).
The park lights will flash once and the siren/horn will honk/chirp once. The LED on the antenna 
will begin to flash (Programmable). The system will arm then monitor the vehicle’s doors, hood 
and shock sensor. If any zone is violated the alarm will activate. The 2way remote will display 
the large Lock icon when locked.

(Some options will require additional parts and/or labour).

UNLOCK/ DISARM ALARM

 Press and release the Unlock Button to unlock the vehicle’s doors (if door locks are connected). 
The park lights will flash twice and the siren/horn will honk/chirp twice. The LED on the antenna 
will stop flashing. If an alarm model was installed the system will disarm. If the alarm was 
triggered pressing Unlock once will turn off the siren, pressing Unlock a second time will unlock 
and disarm the alarm. The 2way remote will display the large Unlock icon when unlocked.

(Some 

options will require additional parts and/or labour).

DRIVER’S PRIORITY UNLOCK

 When this option is installed and programmed, pressing the Unlock Button once will unlock the 
driver’s door. Pressing the Unlock Button a second time will unlock the rest of the vehicle’s 
doors. The 2way remote will display the large Unlock icon when this feature is activated.

(Some 

options will require additional parts and/or labour).

TRUNK RELEASE

 Press and hold the Trunk Button for 3 to 5 seconds to activate the trunk release. When 
activated the park lights will flash twice and the siren/horn will honk/chirp twice, the doors will 
unlock and the trunk will open. The 2way remote will display the large Unlock icon and the Trunk 
icon when activated.

(Some options will require additional parts and/or labour).

SILENT LOCK/UNLOCK 

 If you wish to Lock/ Arm or Unlock/ Disarm your vehicle without siren chirps or horn honks on 
specific occasions, you can do so by pressing the Lock and Unlock Buttons at the same time for 
2 seconds. The system will toggle between lock and unlock without any audible confirmation.

U500/U550

PAGE 9

OWNER'S MANUAL

SYSTEM OPERATIONS

 

 

AUXILIARY 1 OUTPUT

 The auxiliary outputs can be used to control options such as power windows, sunroofs, power 
lift gates, etc. Press and hold the Start Buttons for 3 to 5 seconds to activate the auxiliary output. 
When activated the park lights will flash twice, the siren/horn will honk/chirp twice, the doors will 
unlock then the auxiliary will activate. The 2-way remote will display A1 when activated.

(Some 

options will require additional parts and/or labour).

AUXILIARY 2 OUTPUT

 The auxiliary outputs can be used to control options such as power windows, sunroofs, power 
lift gates, etc. Press and hold the Trunk and Start Buttons for 3 to 5 seconds to activate the 
auxiliary output. When activated the park lights will flash twice, the siren/horn will honk/chirp 
twice, the doors will unlock then the auxiliary will activate. The 2-way remote will display A2 
when activated.

(Some options will require additional parts and/or labour).

PANIC MODE

 Panic Mode is a personal protection feature that will draw attention to your vehicle. To activate 
the Panic Mode feature, press and hold the Lock Button for 3-5 seconds. Panic Mode will flash 
the park lights and activate the siren. The lights and siren will stay active for 60 seconds then 
turn off. To disable panic mode press and release Lock or Unlock on the remote. 

The 2-way 

remote will beep and flash from green to red when in panic mode.

AUXILIARY 3 OUTPUT

 The auxiliary outputs can be used to control options such as power windows, sunroofs, power 
lift gates, etc. Press and hold the Lock and Start Buttons for 3 to 5 seconds to activate the 
auxiliary output. When activated the park lights will flash twice, the siren/horn will honk/chirp 
twice, the doors will unlock then the auxiliary will activate. The 2-way remote will display A3 
when activated.

(Some options will require additional parts and/or labour).

 

CAR FINDER

 Car finder mode can be used to locate your vehicle in a crowded parking lot. Press and hold the 
Start and Trunk Buttons together for 3 seconds. The p

ark lights will flash five times and the 

siren/horn will chirp/honk five times. 

(Programmable Option)

U500/U550

Summary of Contents for 500 Series





















Reviews: