Menu 1- User Settings
..
.
continued from previous page
Setting 5 Active/Passive Locks
1) No Auto-Lock with Passive Arm
1 Flash/Chirp
No auto-lock with passive arming
*2) Doors Auto-Lock with Passive Arm
2 Flashes/Chirps Doors Lock when passive arming
Press & Release the Program Button 5 Times
(Setting 5) Confirmed with 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 6 Sensor Enable/Disable
1) Sensor Disabled
1 Flash/Chirp
Impact Sensor Disabled
*2) Sensor Enabled
2 Flashes/Chirps
Impact Sensor Enabled
Press & Release the Program Button 6 Times
(Setting 6) Confirmed with 6 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 7 Passive/Active Arming
1) Passive Arming
1 Flash/chirp
Auto Arms 30 seconds after last door is closed
2) Active Arming with Rearm
2 Flashes/chirps
If unlock is pressed and no door is opened
*3) Active Arming
3 Flashes/chirps
Arms with remote transmitter only
Press & Release the Program Button 7 Times
(Setting 7) Confirmed with 7 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 8 Auxiliary Outputs
1) Type 1
1 Flash/chirp
Auxiliary outputs Activated
2) Type 2
2 Flashes/chirps
Auxiliary output without unlock/ disarm
*3) No Auxiliary
3 Flashes/chirps
Negative park light output
Press & Release the Program Button 8 Times
(Setting 8) Confirmed with 8 LED flashes.
Press & Hold the Program Button
until the appropriate # of park lights/ siren chirps, then release.
Press & Release the Program Button
to proceed to the next step.
.
*(Default Settings)
Page 17
REMOTE VEHICLE STARTER
INSTALLATION MANUAL
