9
Hardware Description
1.
Front Panel Configuration
1.
POWER BUTTON :
Press to switch between STANDBY and POWER ON modes
.
2.
CH Up/Down
BUTTON
:
Press to change services in normal mode, or to move highlighted-bar in
menu mode.
3.
Display :
The 4-digit display shows the service number or menu state in normal mode. It will show
the local time in standby mode.
4.
Remote Sensor :
Receives commands from remote controller.
5.
STANDBY Indication LED(RED) :
The LED lights on in standby mode.
REMOTE Indication LED(GREEN) :
The LED lights when a key on the Remote Control is pressed.
6.
USB (Front) :
Used to connect external USB storage devices.
7.
SMART CARD READER :
Insert smart card for encrypted service access.
8.
PCMCIA :
To receive other pay-tv service you need a CA-Module(Viaccess, Irdeto, Nagravison, etc.)
and a smart card from the service provider.