41
-
Using USALS :
Dish Longitude :
Enter the longitude position of
the antenna using the
NUMERIC
buttons.
Dish Latitude :
Enter the latitude using the
NUMERIC
buttons.
Go To :
Press the
OK
button to rotate the dish to
the selected antenna position.
Positioner Command :
To use various positioner
commands, press the
OK
button. Then, available
positioner commands will appear.
Dish Setting :
Press the
OK
button to move to
Dish Setting
menu directly.
Service Search :
Press the
OK
button to move to
Service Search
menu directly.
3.3
Service Search
Auto Search Mode :
-
Satellite :
Press the
OK
button to select the target
satellite to be searched.
-
Search Type :
Select the search type.
-
Network Search :
You can select Off or On. When
you select ‘
On
’, you can find more transponders
using the home network. As it refers to NIT during
searching, if there is the frequency information of
other transponder, it searches the other
transponder besides the transponder that the
user inputs.
-
Time Calibration :
You can select ‘Simple’, ‘Full’ and ‘Off’ to get TDT(Time Data Table) from each TP
-
Dish Setting :
Press the
OK
button to move to Dish Setting menu directly.
-
Positioner Setting :
Press the
OK
button to move to the Positioner Setting menu directly.
-
Start Search :
Press the
OK
button to start search.
Manual Search Mode :
-
Satellite :
Press the
OK
button to select the target
satellite for search.
-
Frequency :
Select the frequency from the list to
search.
-
Symbol rate :
Enter the symbol rate using the
NUMERIC
buttons.
-
Polarity :
Select the polarity. (
Vertical/Horizontal
)
-
Search Type :
Select the search type.
-
Network Search :
You can select Off or On. When
you select ‘On’, you can find more transponders using the home network. As it refers to NIT during
searching, if there is the frequency information of other transponder, it searches the other
transponder besides the transponder that the user inputs.
-
Dish Setting :
Press the
OK
button to move to the Dish Setting menu directly.
-
Transmission :
You can select ‘DVB’ and ‘DVB-S2’
-
Start Search :
Press the
OK
button to start a search