ultra-hyperspike
MPA400-MAN-IPFORMER Rev B | Copyright © 2020 USSI
See cover page for export control
Page 12
4. COMMISSIONING
4.1 Post Installation System Check
1) Check to ensure all wiring connections are secure:
o
Speaker wiring (check polarity of each speaker connection)
o
Network Connection
o
24VDC Power (Optional)
2) Verify Network connections and that a DHCP Server is available within the network.
4.2 Power-up Sequence
1) Enable Power
2) MPA400 will acquire an IP Address and announce it on the speaker output.
3) By default, the device will announce itself to a Syn-Apps System, System Status LED and
Application Status LED turn solid.
4.3 Managing Sources and Use of the MPA 400
1) Login
a. Use your web browser to log into the MPA400 Web Interface by typing the IP Address into
your browser.
b. Use the user "admin" and the appropriate password provided on the sticker on the backside
of the device.
2) Configure your Sources
For the configuration of your sources, the following source types are available:
•
Syn-
Apps → Announces the MPA400 as an audio device in a Syn-Apps system
•
Barix Radio → Plays Barix Radio as http stream without any further configuration
•
RTP → Configures the MPA400 to receive an RTP stream
•
HTTP → Configures the MPA400 to receive an HTTP stream
•
SIP → Configures the MPA400 to be a SIP client
•
Local File →Allows to play audio files which are locally stored on the MPA400
