ultra-hyperspike
MPA400-MAN-IPFORMER Rev B | Copyright © 2020 USSI
See cover page for export control
Page 9
3. MAKING CONNECTIONS
The MPA400 system is configured such that connections are made through the conduit knockouts. It is
recommended that connections are made on the same end as the connectors on the CCA. See Figure 4
for reference. Although connections can be made in other locations, appropriate space and wire routing
mechanisms are not provided when routing into other locations.
Figure 4 - Recommended Connection Locations
CAUTION
When making outside connections, ensure proper protection and damage prevention actions are
taken to avoid impacting internal components. Tools making inadvertent impact with internal
component or metal shavings could result in functional issues void of product warranty.
MISE EN GARDE
Lors de l'établissement de connexions à l'extérieur, assurez-vous que des mesures de protection
et de
prévention des dégâts soient prises pour éviter d’endommager les composants internes.
Des outils ayant un impact accidentel avec des composants internes ou des copeaux métalliques
pourraient entraîner des problèmes fonctionnels qui ne seraient pas sous garantie.
