ultra-hyperspike
MPA400-MAN-IPFORMER Rev B | Copyright © 2020 USSI
See cover page for export control
Page 11
3.2 Connecting to a Wired PoE Network
The MPA400 has a standard RJ45 network jack and requires a standard Ethernet cable (CAT5e or better).
If optional 24 VDC power is not used, the network connection will need to provide PoE+ or 4PPoE power.
Figure 6 - Network Connection
3.3 Connecting Optional 24VDC Power Supply
The MPA400 includes a 2-position input connector that will accept 16-26 AWG wire. See Figure 7 for power
supply connections. Install positive (+) power wire in pin 1 (red wire) and negative power wire in pin 2
(black wire). Wire colors shown are for reference only.
Figure 7 - 24VDC Connection
1 2
