ULTIMATE SPEED UPK 10 E2, Operation And Safety Notes

Page: 13 / 285

13 GB/IE/NI/CY/MT
water and seek medical
attention.
z
Specific safety
instructions
„
We recommend charging the
power bank with compressor
1
once a month.
„
A slightly higher temperature
during charging is
absolutely normal and not
a malfunction. However, we
do recommend leaving the
power bank with compres-
sor
1
to rest for 15 minutes
before using.
„
Protect the power bank
with compressor
1
from
moisture and high tempera-
tures, including fires.
„
Store the power bank with
compressor
1
in a dry place
and protect the device from
moisture and corrosion.
„
If you notice the power bank
with compressor
1
is leaking,
producing an unusual odour
or looking deformed in any
way, stop using the device
immediately and contact the
manufacturer.
„
Do not drop the power bank
with compressor
1
while it is
being used.
„
The power bank with
compressor
1
is designed
for use with car tyres. It is not
designed for use with large
tyres like tractor or truck tyres.
„
During inflation, high temper-
atures can be produced at
the air outlet. There is a risk
of burn injuries!
„
When using the jump
lead
18
, ensure that the
black plug is securely
plugged into the vehicle
jumpstart outlet
8
.
„
When using the jumpstart,
make sure that all 3 indicator
lights
13
are lit.
„
If the blue indicator light
13
goes out during the start
attempt, charge the power
bank with compressor
1
.
„
If the vehicle does not
start after the 3
rd – 5 TH Start
attempt, stop the start process
and check the other causes
that may be preventing the
vehicle from starting.
z
Using the device
Note: After switching on the power
bank with compressor
1
with the
power bank switch
9
, the device
switches off automatically after
approximately 20 seconds if the