Solar Collector Connecting
The connecting of the collectors to a collector array can de designed according to the location
and position of the system. Different ways of the connecting reflects the different operation
efficiency. And generally parallel connection and in series connection is suitable for the
collectors as shown with below drawings.
Connection in series: As shown in picture1, put two assembled collectors together, use the
copper connector to connect each solar collector with its 22mm size head. Then connect the
other side of the connector with pipeline. The same kind of connecting shall be carried out
between all the collectors needed.
Parallel connection: First, connect the solar collector outlet and inlet with pipeline with the
copper connector; then, as shown in pic2A and pic2B, the copper bends and three way copper
connectors are used to connect the pipeline together.
The diameter of the pipeline can be Φ12 Φ14 Φ16 and etc
, and the pipeline can be some
kind of copper pipe or stainless steel pipe.
Series Connection
copper bend
Pic 1
Pic 2 A:
three-way copper
connector
Pic 2 B:
copper connector
Summary of Contents for USB 24
Page 11: ......
