Features
- Very fast start-up even under low solar irradiance, due to the small heat capacity of the heat
pipe combined with good thermal conductivity of the aluminium fin which contacts the inside
of the inner glass tube.
- Utilisation all year round even in cold climates;
- The system will still operate in the event of occasional tube breakages;
- Larger solar water systems consisting of more than one panel can be installed using parallel
and/or series connections;
- Auxiliary electric booster is available.
The most obvious advantages of
U
SB series solar water heater
- Can be installed individually or combined with a traditional system;
- Withstand pressure;
- Can operate with occasional tubes breakage and be replaced easily;
- Works well in low-irradiance day with an electric booster
- How to avoid cold water and hot water mixing?
If the outflow rate is limited within 8L/min, through a lot of testing such phenomenon is not
obvious.
Transport and operation instruction
：
■
Packaging and placement Requirements
1. The manifold is with carton packing; and there’s protection cap on both ends of the
header pipe.
2, Prevent moisture or water infiltration when placing the cartons.
3, There are "up" signs on the carton package of the manifold, so it should be placed
accordingly to avoid internal inversion.
■
Transportation requirements:
1, Ensure it is closely located when packing, to avoid the shaking during transport.
2, Place the bottom on a tray or other things which can load bearing.
3. Prevent infiltration of rain or water.
■
Preparation:
1. After received cartons of goods, the first thing is to check whether the cartons are
deformed or damped.
2. Open the cartons and check whether the internal packaging is intact.
3. Check the quantity of the components according to the list.
4. Start the installation if everything is ready.
Summary of Contents for USB 24
Page 11: ......
