Installation on the roof:
The optional reflecting angle for SB series solar collector is 20°, 30° and 40° according to the
locallongitude and latitude.
Procedures:
1. Put the assembled frame on the roof.
2. Move the tile according to the location of the hole on the front support and baseboard for
frame.
3. Move the frame away first, install the mounting nail and expansion bolts into the confirmed
position of the roof.
4. Firm the screw under the hole, and insert the mounting nail through the hole on front legs,
and the expansion bolts into the hole on baseboard according to its exact location.
5.
6.
Spin the screw on the top to adjust to the best location andthen fix it.
Lift cartons of tubes onto roof and fit tubes one at a time.
SMEAR A SMALL AMOUNT OF HEAT PASTE ON EACH HEAT PIPE BULB BEFORE INSTALLING
NOTE:
Please wear protective gloves for this process.
Thoroughly wash hands post installation of tubes
Summary of Contents for USB 24
Page 11: ......
