Ultimaker 3 Extended Installation And User Manual Download Page 42

Page: 42 / 42

Error messages
This is the complete list of error messages that can show up on the Ultimaker 3. For more information on troubleshooting
these error messages please go to the error specific page on the Ultimaker website.

•

An unspecified error has occurred. Restart the printer or go to ultimaker.com/ER11.

•

Max temp. error on PrintCore {display_hotend_nr}. Go to ultimaker.com/ER12.

•

Min temp. error on PrintCore {display_hotend_nr}. Go to ultimaker.com/ER13.

•

Max temp. error on the build plate sensor. Go to ultimaker.com/ER14.

•

Heater error on PrintCore {display_hotend_nr}. Go to ultimaker.com/ER15.

•

The Z axis is stuck or the limit switch is broken. Go to ultimaker.com/ER16.

•

The X or Y axis is stuck or the limit switch is broken. Go to ultimaker.com/ER17.

•

There is a communication error with the print head. Go to ultimaker.com/ER18.

•

There is an I2C communication error. Go to ultimaker.com/ER19.

•

There was an error with the safety circuit. Go to ultimaker.com/ER20.

•

There was a sensor error within the print head. Go to ultimaker.com/ER21.

•

Active leveling correction failed. Manual level the build plate or go to ultimaker.com/ER22.

•

An incorrect print temperature is specified. Go to ultimaker.com/ER23.

•

An incorrect build plate temperature is specified. Go to ultimaker.com/ER24.

•

The motion controller failed to be updated. Go to ultimaker.com/ER25.

•

This print job is not suitable for this printer. Go to ultimaker.com/ER26.

Summary of Contents for 3 Extended











































Search results

Summary of Contents for 3 Extended

Reviews:

Related manuals for 3 Extended

Brands by name

Popular brands

Ultimaker 3 Extended, Installation And User Manual

Search results

Summary of Contents for 3 Extended

Reviews:

Related manuals for 3 Extended

Brands by name

Popular brands