14
The Ultimaker 2+ comes in reusable, durable packaging, specially designed to protect your Ultimaker 2+.
Follow the steps below to unpack your Ultimaker 2+.
1
Open cardboard box, grab the belt and careful pull the Ultimaker 2+ out of the box.
2
Loosen the belt and take out the accessory box.
3
Take the spool with PLA filament and a test print done on your Ultimaker 2+ out of the foam.
4
Remove the foam packaging.
5
Place the Ultimaker 2+ on a flat surface.
6
Lift the build plate and remove the packaging material under the plate.
7
Cut the zip tie that secures the print head.
Hold the Ultimaker 2+ by the frame and do not hold it by the belts or axes while carrying it.
UNBOXING
