7
SAFETY MESSAGES
This manual contains warnings and safety notices.
Provides additional information that is helpful to do a task or to avoid problems.
Warns of a situation that may cause material damage or injuries if you do not follow the
safety instructions.
GENERAL SAFETY INFORMATION
The Ultimaker 2+ generates high temperatures and has hot moving parts that can cause injury. Never reach inside the
Ultimaker 2+ while it is in operation. Always control the Ultimaker 2+ with the button at the front or the power switch at
the back. Allow the Ultimaker 2+ to cool down for 5 minutes before reaching inside.
Do not change or adjust anything on the Ultimaker 2+ unless the change is authorised by the manufacturer.
Do not store items in the Ultimaker 2+.
The Ultimaker 2+ is not intended for use by persons (including children) with reduced physical and/or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety.
Children should be under constant supervision when using the Ultimaker 2+.
Always unplug the printer before performing maintenance or modifications.
