48
TECHNICAL SPECIFICATIONS
CONTROLLER SYSTEM
Dual Processor
Main - ARM core - 90 DMIPS
Supply - Microchip - 8 MIPS
Supply
Intelligent mul2 stage dual switch mode
3.5V, 5V, 7V, 13 - 29.4V
Motor Drive
Single / Dual H-Bridge 56 Amp
Inputs
INF/CLS, INF/OPN, LOCK, TRIG, PED, LOOP, LIGHT, TAMPER, REV1, MARKER1, GSM
Outputs
LIGHT, LOCK, ALARM, PULSE, STATUS, MOTOR
Display
8192 pixels (128 x 64)
Audio
16 Ohm 0.25W speaker with English voice prompts and warning messages.
Navigaon
Joys2ck - 5 way
File System
FAT (USB interface)
Menu System
Graphical Interface with familiar icon naviga2on
SUPPLY SYSTEM
Transformer Input Voltage
110V-120V or 220V-240V AC +/- 10%, 50-60Hz (Input voltage is region dependant)
Controller Input Voltage
12V - 24V AC or 17V - 44V DC
Motor Voltage
12V - 24V DC
Motor Supply
BaGery (12 / 24V) or Transformer driven
Ba0ery Charger
Intelligent mul2 stage charger with automa2c shutdown, current limi2ng and
power save mode.
12V / 24V auto detect
12V Boost cycle up to 2A @ 14.7V
24V Boost cycle up to 0.8A @ 29.4V
Peak Power Consumpon
37.4W ( 156mA @ 240V )
Typical Power Consumpon
Less than 1.7W ( 7mA @ 240V )
Current Consumpon
(motor at rated load)
Up to 20A
COLLISION DETECTION AND PREVENTION
Mulstage Electronic
Collision Detecon
Current, Mo2on and Supply Sensing
Current Sensing
4 Channels 5 stages each
Moon Sensing
2 Channels 5 stages each (Including dynamic sensing and profiling)
Supply Sensing
1 Channel
Infrared Safety Devices
Open & close infrared inputs
Beam Self Test
On compa2ble devices
Loop Detecon
Yes
An-Crush Zone
Yes
Mul User Mode
Yes
Con2nues……...
