background image

22.06.2022

22.06.2022

The product satisfies the relevant safety 

standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER! 

Applicable to the given situation (general 

warning sign).
Wear protective goggles.
Wear a dust mask (respiratory tract protection).
Wear protective gloves.
Wear foot protection.
ATTENTION! Electric shock warning!
ATTENTION! Rotating parts, entanglement 

hazard!

TECHNISCHE DATEN

Parameter description

Parameter value

Product name

Floor scrubber 

Model

Topclean 1100A

Rated voltage [V~]/

Frequency [Hz]

230/50

Rated power [W]

1100

Brush diameter [mm]

430

Brush rotation speed

[rev/min]

154

Water tank capacity [L]

12,4

Protection class

II

Protection rating IP

IPX4 

Dimensions [mm]

123x42.5x52

Weight [kg]

47

The terms „device“ or „product“ are used in the warnings 

and  instructions  to  refer  to  <  floor  scrubber  >.  Do  not 

use in very humid environments or in the direct vicinity of 

water tanks. Prevent the device from getting wet. Risk of 

electric shock! Do not put your hands or other items inside 

the device while it is in use! Do not cover the ventilation 

openings!
2.1. ELECTRICAL SAFETY 

a) 

The  plug  must  fit  the  socket.  Do  not  modify  the 

plug in any way. Using original plugs and matching 

sockets reduces the risk of electric shock.

b)  Avoid touching earthed elements such as pipes, 

heaters, boilers and refrigerators. There is an 

increased risk of electric shock if the earthed device 

is exposed to rain, comes into direct contact with 

a wet surface or is operating in a damp environment. 

Water getting into the device increases the risk of 

damage to the device and of electric shock.

c) 

Do not touch the device with wet or damp hands.

d)  Use the cable only for its designated use. Never 

use it to carry the device or to pull the plug out of 

a socket. Keep the cable away from heat sources, oil, 

sharp edges or moving parts. Damaged or tangled 

cables increase the risk of electric shock.

e) 

If using the device in a damp environment cannot 

be avoided, a residual current device (RCD) should 

be applied. The use of an RCD reduces the risk of 

electric shock.

f) 

Do not use the device if the power cord is damaged 

or shows obvious signs of wear. A damaged power 

cord should be replaced by a qualified electrician or 

the manufacturer ‘s service centre.

g) 

Take special care to ensure that the power cords are 

not caught by the rotating parts of the device.

2.2. SAFETY IN THE WORKPLACE

a) 

Make sure the workplace is clean and well lit. A messy 

or poorly lit workplace may lead to accidents. Try 

to think ahead, observe what is going on and use 

common sense when working with the device. 

b)  Do not use the device in a potentially explosive 

environment, for example in the presence of 

flammable  liquids,  gases  or  dust.  The  device 

generates sparks which may ignite dust or fumes.

c)  If you discover damage or irregular operation, 

immediately  switch  the  device  off  and  report  it  to 

a supervisor without delay.

d) 

If there are any doubts as to the correct operation 

of the device, contact the manufacturer‘s support 

service.

e) 

Only the manufacturer‘s service point may repair the 

device. Do not attempt any repairs independently!

f) 

In  case  of  fire,  use  a  powder  or  carbon  dioxide 

(CO

2

) fire extinguisher (one intended for use on live 

electrical devices) to put it out.

g) 

Children or unauthorised persons are forbidden to 

enter a work station. (A distraction may result in loss 

of control over the device).

h) 

Use the device in a well-ventilated space.

i) 

Regularly inspect the condition of the safety labels. If 

the labels are illegible, they must be replaced. 

j)  Please keep this manual available for future 

reference. If this device is passed on to a third party, 

the manual must be passed on with it.

f) 

Keep the device out of the reach of children.

g) 

Device repair or maintenance should be carried out 

by qualified persons, only using original spare parts. 

This will ensure safe use.

h) 

To ensure the operational integrity of the device, do 

not remove factory-fitted guards and do not loosen 

any screws.

i) 

When transporting and handling the device between 

the warehouse and the destination, observe the 

occupational health and safety principles for manual 

transport operations which apply in the country 

where the device will be used.

j) 

Avoid situations where the device stops working 

during use due to excessive loading. This may result 

in overheating of the drive elements and damage to 

the device.

k) 

Do not leave this appliance unattended while it is in 

use.

l) 

Clean the device regularly to prevent stubborn grime 

from accumulating.

m)  Do  not  mix  different  cleaning  chemicals.  There 

is a risk of producing toxic fumes or creating 

a dangerous mixture.

n)  Do not clean surfaces contaminated with toxic, 

caustic, explosive or similar substances.

o) 

The cleaned surface should be free from potentially 

hazardous objects. Always make sure that there are 

no metal elements or other materials in the work 

area which might be thrown out by rotating parts, 

causing property damage or personal injury.

p) 

Do not use the machine on inclined surfaces.

q) 

Do not use the machine when it is „dry“, i.e., when 

the water tank is empty.

r) 

Do not use strongly foaming detergents. 

s) 

Do not fill the tank with caustic, flammable, explosive 

or similar substances. Use a mild detergent intended 

for use with floor scrubbers.

t) 

Do not fill the tank with hot water.

u) 

Do not use the device without the tank covers on

v) 

Please observe legal requirements for disposing of 

detergents.

w) 

 Do not clean surfaces in explosion hazard areas.

x) 

 Ensure good lighting of the working area.

y) 

 Before starting work, make sure that there are no 

bystanders on the work surface

z) 

When operating the device, move slowly at a steady 

pace. Running with the device is prohibited. 

aa)  While working, hold the device handles with both 

hands.

bb)  Scrubber operation may be difficult on uneven and 

rough surfaces

cc)  The device is not a toy. Children must be supervised 

to ensure that they do not play with the device.

dd)  Warning: Do not inhale exhaust gas fumes. Only use 

indoors when adequate ventilation is provided, and 

when a second person has been instructed to look 

after you.

ee)  Caution: This machine shall be stored indoors.

ff) 

Warning: This machine is not suitable for picking up 

hazardous dust.

gg)  Warning: Do not allow the supply cord to come into 

contact with the rotating brushes.

hh)  Warning: Only use the brushes provided with the 

appliance or those offered by the manufacturer. The 

use of other brushes may impair safety.

2.3. PERSONAL SAFETY

a) 

Do not use the device when tired, ill or under the 

influence of alcohol, narcotics or medication which 

can  significantly  impair  the  ability  to  operate  the 

device.

b) 

The  machine  may  be  operated  by  physically  fit 

persons who are able to handle the machine, are 

properly trained, who have reviewed this operating 

manual and have received training in occupational 

health and safety.

c)  The machine is not designed to be handled by 

persons (including children) with limited mental 

and sensory functions or persons lacking relevant 

experience and/ or knowledge unless they are 

supervised by a person responsible for their safety 

or they have received instruction on how to operate 

the machine.

d) 

The  device  can  be  handled  only  by  physically  fit 

persons who are capable of handling it, properly 

trained, familiar with this manual and trained within 

the scope of occupational health and safety

e) 

When working with the device, use common sense 

and stay alert. Temporary loss of concentration while 

using the device may lead to serious injuries.

f) 

To prevent the device from accidentally switching on, 

make sure the switch is on the OFF position before 

connecting to a power source.

g) 

Do not overestimate your abilities. When using the 

device, keep your balance and remain stable at all 

times. This will ensure better control over the device 

in unexpected situations.

h) 

The device is not a toy. Children must be supervised 

to ensure that they do not play with the device.

2.4. SAFE DEVICE USE

a)  Do not overload the device. Use the appropriate 

tools for the given task. A correctly-selected device 

will perform the task for which it was designed better 

and in a safer manner

b) 

Before putting the device aside. Such precautions will 

reduce the risk of accidentally activating the device.

c) 

Make sure the pressure line is disconnected before 

attempting any adjustments, accessory replacements 

or doing any work on the device. Such a preventive 

measure reduces the risk of an accident.

d) 

When not in use, store in a safe place, away from 

children and people not familiar with the device who 

have not read the user manual. The device may pose 

a hazard in the hands of inexperienced users.

e)  Keep the device in perfect technical condition. 

Before each use check for general damage and 

especially check for cracked parts or elements and 

for any other conditions which may impact the safe 

operation of the device. If damage is discovered, 

hand over the device for repair before use.

1. GENERAL DESCRIPTION

The user manual is designed to assist in the safe and 

trouble-free use of the device. The product is designed 

and manufactured in accordance with strict technical 

guidelines, using state-of-the-art technologies and 

components. Additionally, it is produced in compliance 

with the most stringent quality standards.

DO NOT USE THE DEVICE UNLESS YOU HAVE 

THOROUGHLY READ AND UNDERSTOOD THIS 

USER MANUAL.

To increase the product life of the device and to ensure 

trouble-free operation, use it in accordance with this user 

manual and regularly perform maintenance tasks. The 

technical  data  and  specifications  in  this  user  manual  are 

up to date. The manufacturer reserves the right to make 

changes associated with quality improvement. The device 

is designed to reduce noise emission risks to a minimum, 

taking into account technological progress and noise 

reduction opportunities.

LEGEND

PLEASE NOTE! 

Drawings in this manual are for 

illustration purposes only and in some details may 

differ from the actual product.

The original operation manual is in German. Other 

language versions are translations from German. 

2. USAGE SAFETY

ATTENTION!

 Read all safety warnings and all 

instructions. Failure to follow the warnings and 

instructions may result in an electric shock, fire and/

or serious injury or even death.

REMEMBER!

 When using the device, protect children 

and other bystanders.

9

EN

EN

8

U S E R   M A N U A L

Only use indoors.

Summary of Contents for TOPCLEAN 1100A






















Reviews: