background image

Use 9-volt

ALKALINE batteries.

Do not use

“Heavy Duty” batteries.

Do not use

ordinary “Zinc Carbon” batteries.

Thanks for choosing our GC-1071 metal detector. With this metal detector, you can 

hunt for coins, relics, jewelry, gold, and silver just about anywhere. The detector 

comes with high sensitivity and strong ability of discrimination. 

FEATURES: 

LCD Display:  

Shows the probable type of metal, the depth of the target, range of 

DISC, NOTCH, the level of SENS, VOLUME and battery condition. It also has 
digital display for target ID.

Three Tone Audio Discrimination: 

Sounds three distinctive tones (high, medium 

and low) for different types of metal.

Five Controls:
--POWER: 

Turns on or off the power.

--MENU: 

Press it to select desired operation mode and the setting of SENS and 

VOLUME.

--INCREASE (+): 

Increase the level of sensitivity or volume and the range of DISC 

(discrimination) or NOTCH. 

--DECREASE (-): 

Decrease the level of sensitivity or volume and the range of 

discrimination or NOTCH. 

--PP: 

Pinpoints the location of the target accurately.

Headphone Jack: l

Lets you connect headphones of 3.5mm and operate without 

trouble.

240mm Waterproof Search coil: 

Lets you use the detector even if you must put it 

under shallow water.

Adjustable Shaft: 

Lets you adjust the length of shaft for comfortable use.

Power: 

The detector requires two 9-volt alkaline batteries (not incl.).

Backlight: 

For better use in dark areas.

1

Summary of Contents for GC-1071
















Reviews: