TARGET INDICATIONS
OUTDOOR DETECTING
Note:
There is a wide variety of metals and no target can be identified for certain
until unearthed. This table is for general reference only.
1.Find a place outside where there is no metal.
2.Place a sample you want to find on the ground.
3.Press POWER to power on the detector.
4.Hold the search coil level to the ground about 1~2 inches above the surface,
slowly move the search coil over the area where you placed the sample, sweep
-ing the search coil in a side-to-side motion.
●
Never sweep the search coil as if it were a pendulum. Raising the search coil
while sweeping or at the end of a sweep will cause false readings.
●
Sweep slowly, hurrying will cause you to miss targets.
●
It’s better you sweep the search coil from side to side in an arc line of 3 inches
motion and keep the search coil parallel with the ground
If the detector detects the item, it sounds a tone, and an arrow above the target
icon appears. Also LCD displays the digital value of target as well as the depth.
If the detector does not detect the item, make sure that the mode is set correctly for
the type of metal you’re searching for. Also make sure that you’re moving the
search coil correctly.
10
Metal
range
Target
Tone
ID
Display
Digital
value
IRON
Iron
Foil
5¢
ALUM
ZN
10¢
25¢
50¢
1$
Low
Medium Medium Medium Medium High High
High High
1-19
20-29 30-39 40-49 50-59 60-69 70-79 80-89 90-99
GOLD RANGE
SILVER RANGE
