ULEAD DVD MOVIEFACTORY USER GUIDE 23
3. Select your analog device from the
Source
list.
4. Select a capture file format from the
Format
list.
5. Click
Show/Hide
to show the advanced settings. Next, click
Advanced Settings: Video and Audio Capture Property
Settings
. Here, choose the correct TV system, video and audio
sources. Click
OK
to apply the settings.
6. Click
Advanced Settings: Change Field Order
to set the
appropriate field order.
7. Scan your video using your hardware’s preview buttons to
search the part you want to capture.
8. When you get to the point where you want to start capturing,
click
Capture Video
. Click
Stop Capture
or press
[Esc]
to stop
capturing.
Capturing TV footage
DVD MovieFactory allows you to capture TV footage with a TV
tuner. Capture a segment of your favorite television show on
regular TV or cable then save it in your hard drive in AVI, MPEG, or
Windows Media Video (WMV) format.
To capture TV footage:
1. Check if your computer has an analog video capture card with a
TV input jack. This jack usually uses a TV coaxial cable to input
TV signals from either an antenna or a dedicated cable from your
CATV supplier.
2. Connect your video source device to your capture card. On some
cards, you may need to connect the audio cables.
3. In the
Add/Edit Media
page, click
Capture Video
.
4. Select your analog device from the
Source
list.
5. Select the appropriate
Capture mode
and then enter the TV
channel number of the program to capture.
6. Select the appropriate video format from the
Format
list.
7. Click
Capture Video
to start capturing.
8. Click
Stop Capture
or press
[Esc]
to stop capturing.
