ULEAD DVD MOVIEFACTORY USER GUIDE 11
Analog capture card
To check the setup of DVD MovieFactory for analog
interface:
1. Connect your camcorder, VCR, or other video source device to
your analog capture card.
2. Insert your video tape into the capture device and switch it on.
Make sure it is in the playback mode (usually named
VTR
or
VCR
). See your machine’s manual for specific instructions.
3. Your
Capture plug-in
will be detected automatically.
4. Go to the
Add/Edit Media
page and click
Capture Video
to
open the
Capture Video
dialog box.
5. Check if your device is displayed under
Source
.
USB input device
To check the setup of DVD MovieFactory for USB
interface:
1. Connect your video source device to your
USB
port using a
standard USB cable and switch it on.
2. Your
Capture plug-in
will automatically be detected.
3. Go to
Add/Edit Media
and click
Capture Video
to open the
Capture Video
dialog box.
4. Check if your device is displayed under
Source
.
Note:
If your capture device supports multiple video sources, the
Video and Audio Capture Property Settings
dialog box allows
you to select your desired video source such as Composite, Tuner, or
S-Video. In the Capture Video dialog box, click
Advanced Settings
and select
Video and Audio
Capture Property Settings
from the
pop-up menu.
Likewise, if you have multiple audio sources, this dialog box allows
you to select your desired audio source.
