UIC680 Programmer’s Manual
UDN PM063-U Rev. 4
5-2
Host Polled Application Example
A. UIC680 setting changed
In this example, it assumes UIC680 is in factory default and the user would like to change it
to protocol USI2 and Self-ARM disable.
This process should be done only once to set the UIC680 to the proper state.
Due to the EEPROM life limitation, it is recommended that don’t change the
EEPROM value very frequently. Normally, the configuration setting has done in the
factory production stage, please contact UIC Sales representative for more detail
information.
Initial State
1. Send the configuration command to set
UIC680 to protocol 2.
2. Send the configuration command to set
UIC680 to Self-ARM disable.
Done