UIC680 Programmer’s Manual
UDN PM063-U Rev. 4
4-13
[Block number]
There are two types of block number format
000 to 255 (30h30h30h to 32h35h35h, ASCII Hex)
or
B<00><00> to B<00><FF> (42h00h00h to 42h00hFFh, ASCII Hex)
[Operation mode]
0 (30h, ASCII Hex) – Decrement
1 (31h, ASCII Hex) – Increment
2 (32h, ASCII Hex) – Restore
3 (33h, ASCII Hex) – Decrement and transfer to the different block.
4 (34h, ASCII Hex) – Create Mifare Value in the block.
[Value]
Binary Hex from 0h to FFh
For option 3 only, the data format is same as [block number]
RESPONSE ‘^’ – Acknowledgement
‘*’ – No card response or No power on the antenna
‘!’
–
Bad
parameter
•
X (58H) – Mifare classical card activation
COMMENT Perform
request/anticollision/select command to activate the card.
It is also can be used for any ISO14443 compatible card.
RESPONSE ATQA/SAK/serial number if the command executed successfully for type
A card
ATQB
(12
bytes)
if
the
command
executed successfully for type B card
‘*’ – No card response or No power on the antenna
•
x (78H) – Card halt
COMMENT Card halt command.
RESPONSE ‘^’ – acknowledgement
‘*’ – No card response or No power on the antenna