3
1. Description
IntelliLight gives you realistic lighting for your model railway layout.
IntelliLight illuminates your layout
depending on
the time of day and
weather.
When you switch the lighting system
on it starts at
dawn. The
sun
rises
after a magnificent morning red. If the sun sets again after an eventful day
the moon bathes the entire layout in a mysterious silvery light.
According to the conditions the weather is radiantly beautiful or gloomy.
Now and then it rains or a thunderstorm passes through and lightning
flashes and it thunders.
The routine of the day, with an adjustable time, is started when the layout is
switched on. The kind of the lighting depends on the time and cloudy
appearance. Thunderstorms and rain appear randomly or by the push of a
button.
Depending on programming
,
the day passes in 24 hours or up to 20 times
faster, in approximately 1¼ hours. The lighting can be switched manually or
automatically time controlled.
All pre-programmed time tables can be changed in duration and intensity by
LNCV programming according to one’s own
wish
. The system can be used
with analog and digital layouts. The lighting system is powered with a
normal Model railway transformer.
2. The Components
Basic Unit Part No. 28000
T
he electronic controller, two white, one red and one
blue CCFL (cold
cathode fluorescent) tubes, one Halogen flood light and two end caps
.
For connecting numerous add-on units
.
Dimensions (L x W x H): 600 x 105 x 66 mm
.
Add-on unit – White Part No. 28010
Four white tubes and a 10W Halogen flood light, inc. connecting cable and
2 connecting plates.
Dimensions (L x W x H): 600 x 105 x 66 mm.
Add-on unit – Colour Part No. 28020
Two
white, one red and one blue CCFL tube and one 10W Halogen flood
lamp, inc. connecting cable and 2 connecting plates.
Dimensions (L x W x H): 600 x 105 x 66 mm.
Add-on unit – Lightning & Sound Part No. 28110
One
unit with flash lamp and one unit with Loud speaker and IntelliSound
module “Rain und Thunder“, inc. connecting cable and 2 connecting plates.
Dimensions (L x B x H): 200 x 105 x 66 mm each
Add-on unit – Empty channel Part No. 28150
3 units for extending the length of the lighting, inc. 6 connecting plates.
Dimensions (L x B x H): 200 x 105 x 66 mm.
End caps Part No. 28190
2 Pieces
Summary of Contents for 28000
Page 1: ...Manual...
