8
the side panel of the lamp box.
The
power cable must be run to the
loudspeaker between metal chassis and base of the lamp.
5.5 Connecting an external Amplifier
Near the loudspeaker of the sound unit is a board with a connector. An
external amplifier can be connected to this.
5.6 Connecting the LocoNet for Digital Control
If the light system is to be operated by a digital center with LocoNet
connection (Intellibox, DAISY, Märklin 6021 with 6021-Infrarot & LocoNet
adapter, Fleischmann TwinCenter, Piko power box), the LocoNet cable from
the digital center is connected to the basic unit (connector 1). Additional
cables can be found in our catalog.
5.7 Connecting Keys and LED‘s for Analog Operation
If the Light system is to be used with a conventional DC or AC layout or a
digital controller that does not have a LocoNet output
,
it can be
controlled
by using push button keys. Any normally open momentary push button
switch can be used as keys.
Connect the switches and the LED to the 5-way plug as shown in the
diagram. Insert the plug into connector 2 of the base unit.
LED – Model time indicator
Key 3 – Change model time
Key 2 – Trigger long thunderstorm
Key 1 – Toggle day/night
Common return line for keys und LED
Connector 2 – Keys and LED‘s for analog operation
6. Operation
The lighting system is controlled by an internal model clock.
Sunrise
is set
at
7:00 o'clock and sunset
at
19:00. Weather events (cloudy
appearance, rain and thunderstorm) are randomly inserted in the daily and
night sequence.
When the lighting system is switching on, the model clock is set at 7:00
o'clock and so the sunrise occurs. Sunrise, sunset and up to 8 different
weather events can be activated by key instruction.
Furthermo
re,
the system can be brought into a layout service mode, when
all white CCFL tubes and halogen lamps are brought to maximum
brightness. In this mo
de,
the system clock is stopped so that this state is
not independently changed.
Summary of Contents for 28000
Page 1: ...Manual...
