7
USING YOUR ICE MAKER
PROBLEM
POSSIBLE CAUSE
SOLUTION
“
W
ater” indicator is
on.
Water level is too low.
Stop the ice maker, fill water, and restart.
“Ice” indicator is on.
Ice basket is full.
Remove ice from ice basket.
“Water” and “Ice” indicator
are both flashing.
Ice shovel is stuck.
Check if ice is blocking the ice shovel,
otherwise, consult a certified technician.
Ice cubes stick together.
Ice making cycle is too long.
Stop the ice maker, and restart when the
ice blocks melt. Select the small ice
size.
Water temperature in inner tank is
too low.
Change the water in the reservoir. Use
water between
5
℃
-
3
2
℃
.
Ice making cycle is normal
but no ice is made.
Ambient temperature or water
temperature in inner tank is too
high.
Please operate the ice maker below
ambient temperature of 3
2
℃
and use
cold water.
Refrigerant liquid leakage.
Consult a qualified technician.
Pipe in the cooling system is
blocked.
Consult a qualified technician.
Ice Maker is leaking water
The water drainage cap may be
not be tightened properly.
Tighten the drainage cap.
The ice cubes are melting.
Location of appliance may cause
temperature changes.
Also constant opening and
shutting of the lid may also cause
variable temperature fluctuations.
Leaving ice in the appliance for an
extended period of time may also
result in the appliance recycling
the ice by melting it down and
making a new batch.
Make sure the appliance is always
placed in a temperature regulated area.
Avoid leaving the lid open.
Transfer ready-made ice to another
container and store in a cooler or freezer
to avoid recycling.
TROUBLESHOOTING
Summary of Contents for UBM 20
Page 10: ...9...