5
DANGER
UNPACKING YOUR ICE MAKER
1. Remove all exterior and interior packaging. Check that ice basket and ice scoop is included. If any part or
accessory is missing, please contact our customer service.
2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it in warm water.
3. Wipe clean the evaporator rods using a water/vinegar solution.
4. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.: stove,
furnace, radiator). Place the ice maker on a level surface. Maker sure that there is at least 15cm of space between
the back and sides of your ice maker and the wall.
5. Allow the refrigerant fluid to settle for several hours before plugging in the unit.
6. The appliance must be positioned so that the plug is accessible.
CONNECTING YOUR ICE MAKER
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged
please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a
three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. Do not under any circumstances, cut
or remove the third (ground) prong from the power cord. Any questions concerning power and/or grounding should
be directed toward a certified electrician.
3. This appliance requires a standard 220-240 volt, 50Hz electrical outlet with three-prong ground.
Before using your ice maker, it is strongly recommended to clean it thoroughly.
CLEANING AND MAINTAINING YOUR ICE MAKER
Remove the ice basket.
1. Turn the drain cap counter clockwise to drain out the water.
2. Clean the interior with diluted detergent, warm water and a soft cloth.
3. The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.
4. Dry the interior and exterior with a soft cloth.
5. Close the drain cap.
6. When the machine is not in use, open drain cap to drain water completely from water reservoir.
OPERATING PROCEDURES & MAINTENANCE
The ice maker is not designed to be installed in an outside area such as a garage or a
porch. Ambient temperatures of below 10
℃
or above 38
℃
will hinder the
performance of the appliance.
Summary of Contents for UBM 20
Page 10: ...9...
