UGO BASILE - I
TALY
Page 16
38500 Instruction Manual (Rev. 1)
showing that this configuration setting has been changed to
end on Foot pedal.
Press
Next
to see the next configuration option.
The
Configure
menu consists of 17 screens by which the user may adjust the following
features of PAM.
The factory
default settings
are shown in brackets.
How each measurement is ended (
automatically on the force level
)
Store every measurement regardless (
only good measurements, i.e. accepted by
the user, are stored)
Show the offset value before each measurement (
None
)
Make a warning noise if a preset force is exceeded (
Do not
)
Show abbreviated configuration settings on the
Measure
menu (
Do not
)
Store the force waveform or only the peak value (
store waveform
)
Ask whether the test is on Left or Right (
Do not
)
Use Subject Numbers (
Do not; only use Test number
)
Use the applied force rate-meter during tests (
Do not; only use Text
)
Adjust the force value which triggers the start of the measurement (
2% of full scale
)
Adjust the warning noise threshold value (
300gf
)
Adjust the maximum time allowed for a measurement (
15s
)
Adjust the period of inactivity after which PAM switches OFF (
never
)
Adjust the normal display brightness (
10
)
Adjust the period of inactivity after which the display dims (
never
)
Adjust the target force rate
(120gf/s)
Set current date and time – this can be set by the PAM control unit or by the PC
Return to the
Main Menu
(by pressing
Exit
).
Pressing
Restore defaults
on the
Configure Menu
screen shows:
Configuration Menu
Force lvl Foot pedal
----------
Next Change
Reset memory
All stored data
will be lost
Cancel Confirm
Summary of Contents for PAM
