See
Attollo WASP-200 Altimeter Configuration
to find all available settings with default values
and descriptions.
Lightware SF11/C Altimeter Setup
1. Set
LIGHTWARE_SF
item to
true
in
[PAYLOADS]
section:
[PAYLOADS]
LIGHTWARE_SF=true
2. Choose the appropriate
CONNECTION_TYPE
in the
[LIGHTWARE_SF]
section
depending on which UgCS SkyHub connectors it is used to. Set it to
I2C
when used
connector configured as an I²C interface or to
UART
when used connector configured
as an UART interface:
[LIGHTWARE_SF]
CONNECTION_TYPE=I2C
; or
CONNECTION_TYPE=UART
3. Choose the appropriate
SERIAL_DEVICE
in the
[LIGHTWARE_SF]
section if the
UART
connection type has been chosen. Set it to
/dev/ttymxc5
when connecting to
the 5-pin Lemo connector (see
/dev/ttymxc1
when connecting to the
4-pin Lemo connector (see
):
[LIGHTWARE_SF]
SERIAL_DEVICE=/dev/ttymxc5 ; UART1 (5-pin Lemo)
; or
SERIAL_DEVICE=/dev/ttymxc1 ; UART2 (4-pin Lemo)
See
Lightware SF11/C Altimeter Configuration
to find all available settings with default values
and descriptions.
13 • Payloads Setup
UgCS SkyHub User Manual
Copyright © 2019—2021, SPH Engineering
62
Revision 5 • November 2021
