UFO Vega SLP-2700M, User Manual

Page: 4 / 16

VEGA USER GUIDE
4
INSTALLATION
The light source is powered from a 24V Dc PSU or a constant Voltage SELV LED driver.
The driver caters for UK/European/other mains supplies using the relevant power cord
supplied.
POWER SUPPLY REQUIREMENTS
There are 2 connections required – the fibre port and the mains supply cable. The fibre port
should be connected first. connect and secure the fibre optic connector into the collar and
secure using the M5 locking screw.
connect the PSU to the Dc input jack socket on the light source, and connect the IEc cable to
the PSU. Plug the mains plug into the electrical supply socket. Switch on power. The led
indicator will illuminate and the light source is ready for use. If no light is produced consult the
TROUBLESHOOTINg section of this user guide.
Note: these light sources are not mains dimmable.
CONNECTION
-
VEGA M MODELS ONLY
VEgA SLP
-
XXXXM cONNEcTIONS VEgA SLP
-
XXXXDMX
/ 10
V cONNEcTIONS