13
UFO LIGHTING
TROUBLESHOOTING
Problem
Possible Cause(s)
Remedy
0-10V Version
unit is dead -
no light output -
but LED
indicator on
light source is
illuminated.
No 0-10V dimming to unit
(0V= LED Off)
Refer to manual diagram for
correct termination.
Carry out continuity check.
Carry out voltage / polarity
0-10V cable fault check
0-10V cable fault
Controller fault
Carry out voltage / polarity
check at controller.
Repair / replace as necessary
0-10V LED PCB failure
Replace 0-10V PCB
No 0-10V signal
present
Controller off or failed
Check controller. Ensure 0-
10V signal present
0-10V cable faulty
Carry out voltage and
polarity check on mini XLR
plug. Repair as necessary
ADDITIONAL PROCEDURES FOR
0-10
V MODELS ONLY
Note:
please complete relevant troubleshooting procedures before returning the unit to us for
further investigation.
Summary of Contents for Vega SLP-2700M
Page 15: ...15 UFO LIGHTING NOTES...
