UFO Nebula RGB Light Source, Product User Manual

Page: 8 / 24

OPERATION
NEBULA RGB USER GUIDE
8
USER CONTROLS
Operation of the Nebula RGB model is carried out via the top panel display and associated push
button controls as detailed below:
MENU
SELECT / ENTER SCROLL DOWN
( ­ )
SCROLL UP
(+)
On power up the display will momentarily display “Universal Fibre Optics” then the current
model version letter, then the firmware version, before going into initialisation whilst it checks
the unit before displaying the current status (example below).
Once the luminaire is powered up, user controlled manual functions and all programming
features are available via the four top panel pushbuttons as detailed in the figure above and the
following table.
IMPORTANT NOTE:
Once programmed the luminaire will always revert to the programmed
settings when power is recycled. However, if manual reset is selected, via Default Setting
YES/NO option, the luminaire will revert to factory default settings as detailed below:
Displayed momentarily
Displayed momentarily
Display indica ti ng status on power
up (example shows the factory
default se
tti ng a ft er a Reset)