UFO Nebula RGB Light Source, Product User Manual

Page: 5 / 24

INSTALLATION
5
UFO LIGHTING
REAR PANEL OVERVIEW
CONNECTION
-
FOR MANUAL OPERATION
There are two connections required – the fibre multi-port and the DC input jack plug.
The fibre multi-port should be connected first before the DC supply. Connect all the individual
fibre optic ferrule connectors securely into the correct aperture in the fibre optic multi-port on
the top of the unit. Ensure each fibre optic connector is fully inserted into the correct numbered
aperture as detailed on the preceding page.
Never run the luminaire with the fibre optic ferrule connectors out of the multi-port
apertures.
Plug the IEC connector into the IEC socket of the DC power supply unit and then plug the mains
connector into a local mains supply.
Switch on power and the light source is ready for use.
If, after using the control and program buttons and display as detailed in the operation section
of this manual, no light is produced consult the troubleshooting section in this manual.
DMX
DC Power In
N/C
N/C