UFO Nebula RGB Light Source, Product User Manual

Page: 15 / 24

OPERATION
15
UFO LIGHTING
DMX OPERATION
All Nebula models in the range can be DMX controlled as detailed in the following sections.
• For all DMX operation modes, the luminaire must be programmed to DMX.
• Repeated pressing of MENU button accesses sub menus.
• Refer to Programmable Function Table for Menu and Sub Menu availability for each model.
NOTES:
MENU > > ENTER to accept
Control Mode:
DMX
DMX ADDRESS
With the luminaire in DMX Control Mode, the address can be set between 001 and 512
MENU > > Scroll UP/DOWN to set address > ENTER to accept
Set DMX Address:
1
• For Master slave operation all Slaves must be addressed 001.
• This is a 180 channel DMX device (see table on following page) always ensure sufficient
channels are available after the address.
NOTES:
DMX CHANNEL
With the luminaire in DMX Control Mode, the number of DMX controlled channels available can
be set to either 1 (single address controlling all channels) or 180 (180 addresses controlling
individual channels)
MENU > > Scroll UP/DOWN to select 1 or 180 > ENTER to accept
DMX Channel Mode:
1
MASTER DIMMER
With the luminaire in DMX Control Mode, the maximum brightness of the 60 LEDs can be set
between 1% (minimum) or 100% (maximum)
MENU > > Scroll UP/DOWN to select value > ENTER to accept
Master Dimmer:
100%
DEFAULT SETTINGS
With the luminaire in Master Control Mode, the light source can be defaulted to factory settings.
MENU > > Scroll UP/DOWN to select YES or NO > ENTER to accept
Default Settings:
NO
See opposite page for default facrory settings display.