UFO Nebula RGB Light Source, Product User Manual

Page: 2 / 24

INTRODUCTION
NEBULA RGB USER GUIDE
2
Thank you for purchasing this UFO light source.
To ensure that the light source is set up optimally and gives a long service life, please read
this user guide before installing, operating or performing any maintenance on the unit.
Please keep this user guide for future reference.
This User Guide is laid out in three sections:
•
INSTALLATION – details how to connect your luminaire.
• OPERATION – details how to programme and set up your luminaire.
• MAINTENANCE – Maintenance log, Troubleshooting Guide, Technical Specification
• This product must be installed in accordance with the applicable installation code, by a
person familiar with the construction and operation of the product, and the hazards involved.
• These light sources are not mains dimmable.
• The multiport LED array and heatsink in this light source can be replaced when it reaches end
of life. Contact UFO for details
• T
ype Y Attachment: If the external flexible cable or cord of this luminaire or associated
PSU/driver is damaged, it shall be exclusively replaced by the manufacturer or his service
agent or a similar qualified person to avoid a hazard.
•
Location: Do not locate this light source closer than 200mm from any flammable surface.
•
Clearance / Ventilation: It is imperative that a gap of 200mm is left around the unit. This is to
allow air to circulate and prevent overheating. The location must have free ventilation and
must not have an ambient temperature higher than that specified for the unit.
•
Mounting: This luminaire comes with an integral mounting feet for securing the unit to a
vertical or horizontal surface.
•
Warning: Always connect the fibre ferrules to the 60 LED array before power is applied to the
light source. Never look directly at the luminaire through the fibre multi-port of the
light source.
•
Warning: The luminaire should be positioned so that staring into the luminaire at a distance
closer than 2.7 metres is not expected.