Thank you for purchasing this UFO illuminator/luminaire.
To ensure that the illuminator is set up optimally and gives a long service life, please read this
user guide before installing, operating or performing any maintenance on the unit.
Please keep this user guide for future reference. This User Guide is laid out in three sections
• INSTALLATION – details how to connect your luminaire.
• OPERATION – details how to programme and set up your luminaire.
• MAINTENANCE – Maintenance log, Troubleshooting Guide, Technical Specification
MODELS
COVERED
BY
THIS
USER
GUIDE
UFO MIC100PT-3 :Warm White (3000K) Twinkle effect wheel
UFO MIC100PT-4 : Neutral White (4000K) Twinkle effect wheel
UFO MIC100PT-6 :Cool White (6000K) Twinkle effect wheel
UFO MIC100PC-3 : Warm White (3000K) Color change effect wheel with 6 color segments
UFO MIC100PC-4 : Neutral White (4000K) Color change effect wheel with 6 color segments
UFO MIC100PC-6 : Cool White (6000K) Color change effect wheel with 6 color segments
UFO MIC100PCT-3 : Warm White (3000K) Color change / twinkle sandwiched Wheel
UFO MIC100PCT-4 : Neutral White (4000K) Color change / twinkle sandwiched Wheel
UFO MIC100PCT-6 : Cool White (6000K) Color change / twinkle sandwiched Wheel
IMPORTANT
• This product must be installed in accordance with the applicable installation code, by a
person familiar with the construction and operation of the product, and the hazards involved.
• These illuminators are not mains dimmable.
• The LED array in this illuminator is not replaceable. When it reaches end of life the whole unit
must be replaced.
• Type Y Attachment: If the external flexible cable or cord of this luminaire or associated
PSU/driver is damaged, it shall be exclusively replaced by the manufacturer or his service
agent or a similar qualified person to avoid a hazard.
• Location: Do not locate this illuminator closer than 200mm from any flammable surface.
• Clearance / Ventilation: It is imperative that a gap of 200mm is left around the unit. This is to
allow air to circulate and prevent overheating. The location must have free ventilation and
must not have an ambient temperature higher than that specified for the unit.
• Mounting: This luminaire comes with an integral mounting feet for securing the unit to a
vertical or horizontal surface.
• Warning: Never look directly at the luminaire through the fiber port of the illuminator.
• Warning: The luminaire should be positioned so that staring into the luminaire at a distance
closer than 2.7 metres is not expected.
INTRODUCTION
MICROLED
100
PD
USER
GUIDE
2
