UFO Luna CM, Product User Manual

Page: 2 / 16

MODELS COVERED BY THIS USER GUIDE
UFO Luna CM / UFO Luna TM
UFO Luna MCM / UFO Luna MTM
UFO Luna CDMX / UFO Luna TDMX
UFO Luna C 0-10V / UFO Luna T 0-10V
IMPORTANT
This product must be installed in accordance with the applicable installation code, by a person
familiar with the construction and operation of the product, and the hazards involved.
These illuminators are not mains dimmable.
The LED array in this illuminator is not replaceable. When it reaches end of life the whole unit
must be replaced.
Type Y Attachment:
If the external flexible cable or cord of this luminaire or associated
PSU/driver is damaged. It shall be exclusively replaced by the manufacturer or his service agent
or a similar qualified person to avoid a hazard.
Location:
Do not locate this illuminator closer than 200mm from any flammable surface.
Clearance / Ventilation:
It is imperative that a gap of 200mm is left around the unit. This is to
allow air to circulate and prevent overheating. The location must have free ventilation and must
not have an ambient temperature higher than that specified for the luminaire.
Mounting:
This is a fixed luminaire. See mounting plate instruction on Page 3 for
fixing to surface.
Warning:
Never look directly into the luminaire LED illuminator.
Warning:
The luminaire should be positioned so that prolonged staring into the
luminaire at a distance closer than 0.33m is not expected
Thank you for purchasing this UFO illuminator.
To ensure that the illuminator is set up optimally and gives a long service life, please read this
user guide before installing, operating or performing any maintenance on the unit.
Please keep this user guide for future reference.
This illuminator is suitable for indoor use only unless it is situated in a weatherproof enclosure.
INTRODUCTION
LUNA USER GUIDE
2