UFO Luna CM, Product User Manual

Page: 12 / 16

PROCEDURES FOR ALL MODEL TYPES
Note:
Please complete relevant troubleshooting procedures before returning the unit to us for
further investigation.
ADDITIONAL PROCEDURES FOR MANUAL DIMMING MODELS
Problem Possible Cause(s) Remedy
Unit is dead –
no light output
and LED power
indicator on
PSU is not
illuminated
Mains supply o ff Check supply & reinstate
Loose mains plugs Check plugs
Plug fuse blown (UK) Check fuse. If blown, replace
PSU failed Replace PSU
Unit is dead –
no light output
and LED power
indicator on
PSU is illumi ­
nated, but LED
indicator on Illu ­
minator not
illuminated
PSU failed Replace PSU
Problem Possible Cause(s) Remedy
Unit is dead –
no light output
but LED power
indicator is
illuminated
Dimming control at minimum
adjust
Adjust brightness on dimmer
control at rear
Dip switch no 10 not switched
on
Remove cover and switch dip
switch 10 to on
LED array or drive failure Replace illuminator
Poor light
output on fi ber
Illuminator dimmed either
manually or by DMX or 0 ­ 10V
control
Check and increase dimmer
se tti ngs as appropriate
LED driver failure Replace illuminator
TROUBLESHOOTING
LUNA USER GUIDE
12