OPERATION
COMET
USER
GUIDE
10
USER
CONTROLS
Operation of the Comet is carried out via the rear display and associated push button controls
as detailed below:
MENU
SELECT / ENTER
MENU SCROLL
DOWN (-)
MENU SCROLL
UP (+)
POWER
UP
On power up the display will firstly display as follows and as detailed below:
• The Comet firmware version
• The current status of the unit
Master Dim: 100%
Spd4
CW
Pulsar Firmware Version
Pulsar Current Status
Comet V1.0.000
The current status used as an example above depicts the light source configured as a DMX
Master, light output 100% (undimmed), this is the factory default setting – see section below.
Once the luminaire is powered up, user controlled manual functions and all programming fea-
tures are available via the four rear panel pushbuttons as detailed in the figure above and the
following Programmable Function Table.
Summary of Contents for Comet Light Source
Page 23: ...NOTES 23 UFO LIGHTING ...
