12
InSTALLATIOn
3�4 Handling with packaging
3�4�1 Preliminary warnings
The appliance must be handled only by qualified per
-
sonnel, adequately equipped and with equipment suit-
able for the weight and dimensions of the appliance.
Before moving the unit, check the lifting capacity of the
machinery used following the instructions on the pack-
aging.
Move the unit to a horizontal position.
Stay clear of the area below and around it when the
load is lifted off the ground.
If a forklift truck is used, put the base in the appropriate
openings.
Avoid dangerous situations when using a hoist to lift
the appliance.
3�4�2 Movement methods
The product can be handled as follows:
• using a fork lift or a transpallet which can bear its
weight
3�5 Storage
3�5�1 Preliminary warnings
Stored in accordance with the applicable national reg-
ulations.
Do not turn the packaging upside down.
Do not stack the appliances.
Only place the appliance in a horizontal position.
3�5�2 Appliance with packaging
Store the package:
• in a dry and clean place
• in a closed environment protected from atmospheric
elements
• insulated from the ground by crossbars or pallets
3�5�3 Appliance without packaging
The following procedures are recommended in the case of
medium to long term storage:
• check that no water is present in the hydraulic sys-
tems
• do not remove the protection of the heat exchanger
•
do not remove plastic protective films
3�6 Unpacking
3�6�1 Preliminary warnings
Check that no components were damaged during
transport.
Dispose of the packaging components following the ap-
plicable waste disposal regulations. Check for disposal
arrangements with your municipality.
The packing material (cardboard, staples, plastic bags,
etc.) must not be dispersed or abandoned in the sur-
rounding environment and must be kept out of chil-
dren reach, as it can be dangerous.
Summary of Contents for Velair i10 VSD SMART
Page 31: ...31 NOTE...
