19
18
INSTRUCTIONS FOR USE
OPERATIONAL MODE:
Once the product has been turned on, it operates uninterrupted for up to 3 hours, after
which time the automatic safety stop is activated.
AUTOSTOP OR AUTOMATIC SAFETY STOP:
In order to minimize the risk posed to the user from inadvertently leaving the blanket
on for a long period of time, this series includes a special safety automatic stop feature,
which actives after the device has been left on for 3 continuous hours if the control key
has not been activated.
Prior to connecting the product to the mains, check your power supply voltage to ensure it
is the same as the one indicated on the label included on the product.
TURNING ON THE DEVICE
Connect the product to the appropriate mains.
In order to turn on the product, you must select the slider switch on the control, setting it
to position 1, 2 or 3 (Fig.1).
From this time on, the product is operational.
TURNING OFF THE DEVICE
The maximum operation time is 3 hours, after which the automatic safety shut-down will
immediately activate. The product will no longer heat up when in this state.
To turn on the product again, set it to position “0” and select the desired temperature.
Select the “0” position in order to turn off the product before you disconnect the device
from the mains
OTHER REMARKS
Try to avoid excessive exposure to heat from high temperatures.
Let the blanket cool down prior to folding it for storage and do not place objects on top of
it.
TROUBLESHOOTING GUIDE
Possible operational problems
PROBLEM
RECOMMENDATION
After it is turned on, the control screen is
correctly configured with the temperature level
1, but the blanket does not heat up or only heats
up a little.
If the blanket heat cannot be felt, cover with a
blanket to retain heat.
Increase the temperature level.
The blanket has stopped operating.
Check that the control is properly connected to
the blanket AND IS PLUGGED IN.
The automatic switch-off may be activated.
Turn the control off and on again. If the problem
continues, contact an authorised technical
support service centre.
PRODUCT DISPOSAL AND CONSERVATION
PRODUCT CONSERVATION
Unplug the product when you do not intend to use
it for an extended period of time to prolong its
shelf-life. Prior to storing the product, allow it to
cool before folding, keep it in its original packaging
in a dry location with the fewest possible folds,
without placing any objects on top.
PRODUCT CLEANING
The product has a removable connection.
Always unplug the plug from the socket and remove the product from the control
connection prior to cleaning the product (See Fig. 2.)
The product can be washed by hand or in a washing machine, using liquid detergent and
selecting the delicate wash program set to a short cycle.
Ensure that your washing machine can withstand the weight of the blanket when it is wet.
To prevent damage to the product, DO NOT wash the product with the control knob
attached.
Hang the product horizontally and do not wring or fold during drying. Do not use in the
