PIPELINE CLEANING & TELEVISING EQUIPMENT
PIPELINE CLEANING & TELEVISING EQUIPMENT
VU Meter/Battery Alarm Reset Button
The VU meter shows the user when audio is being input to
the system. In order to use the VU meter the user must hold
down the button while talking into the microphone. The same
button is used for silencing the battery alarm.
Microphone Input
The microphone jack enables the operator to record audio
onto the DVR while recording visual information. A standard
microphone with an on/off switch and a 1/8” plug is provided
with the unit.
Monitor Controls
Located under the monitor (Figure 2.8), these buttons allow
the user to adjust picture settings, change inputs, and adjust
the volume of the system.
Figure 2.8
-15-
Digital Video Recorder (DVR)
The DVR allows the operator to digitally record the picture
on an internal hard drive. The hard drive has a 160GB
capacity which allows for around 120 hours of continuous
recording.
DVR Remote Control
The wireless DVR remote control allows the user to control
the unit while operating from a distance. There is an infrared
sensor located near the DVR power light that receives the
signal from the remote.
-32-
Standard & Roller Type Skids
In addition to brush skids, UEMSI
manufactures rugged metal skids for
use in 6”, 8”, 10” and 12” pipelines.
These skids are most effective on
straight paths where the camera
requires centering. (Fig 4.4)
For minimized friction between the
skid and pipeline, a roller version is available. These roller
skids are available in 8”, 10”, 12” and 15” sizes (Fig. 4.4).
Contact your UEMSI Representative for further details.
14.4V Battery System
NiMH Battery Pack
UEMSI also offers a 14.4V
battery pack for powering
the system when there is
no electricity available.
(Fig 4.5) Every ProCam
comes battery ready for
use with a battery. A bat-
tery will last for up to
2-hours of recording. Each
system has an alarm built
in to let the user know when
the battery is depleted.
Figure 4.4
Figure 4.5
