14
CAL:
Allows the user to check the calibration of the analyzer using precision calibration test gases. It is
recommended this is done every 3 months. Test gas is available from your service centre. The
following can be performed in this menu:
• Set the calibration test GAS VALUE in the analyzer.
• CHECK the calibration accuracy against the test gas.
• RESET calibration values to factory settings.
Use the or to select from the
following functions. Press to select.
Details for performing the above functions can be
found in Section
10.4 – Gas calibration verification.
5.2.3 Units Menu
Allows the vehicle registration number to be changed and all displayed units to be changed.
Vehicle Registration Data
Allows the vehicle registration number to be entered. The format for the data is 8 characters alphanumeric
as follows:
1234567890:;<>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ/space/
The cursor
T
indicates this character can be changed. Select the correct character from the list using
and press when
correct.
Repeat until all the vehicle registration is correct .
GAS VALUE
CHECK
RESET
DATA
:T123 ABC
TEMP
:C
EFF
:LAMBDA
PEF
:0.512
DATA
:T123 ABC
TEMP
:C
EFF
:LAMBDA
PEF
:0.512
