13
5.2 Menu Options and Settings
5.2.1 Main Menu
The MAIN MENU consists of 4 sub menus which are shown below and detailed on the following pages.
All sub-menus are accessed using and exited using
The and keys move the cursor within a menu and allow parameters to be changed.
TIP
Holding down one of these keys scrolls through the data quicker.
5.2.2 Select Menu
This menu allows selections to be made for the parameters detailed below.
OPTIONS
SET:
ZERO
HC RESIDUE
LEAK
CHECK
FUEL:
GASOLINE
LPG
CNG
RPM:
2 STROKE
4 STROKE
/12,/8,/6,/5,
/4,/3,/2
MAIN MENU
1.
SELECT
3. DISPLAY
2.
UNITS
4. SETUP
S
ET
:ZERO
FUEL
:GASOLINE
RPM
:4 CYCLE
CAL
:CHECK
Allows manual activation of zero setting, HC residue and leak
checking functions. More details on these functions can be
found in Section 10 - Zero checks and re-calibration
Select the fuel the vehicle is using from a standard fuel stored
in the analyzer. Select from:
To allow the analyzer to determine the correct revolutions per
minute of the engine it must know if it is a 2 or 4 stroke (use
2 stroke for DIS systems) when using the inductive clamp.
Select the number of cylinders if connecting to the low tension
side of the coil. Eg. /12 (test leads are optional)
