29
1.
Enter the
Setup Mode
2.
Spin to
dB Scale Select
(
Menu 31
blinks).
3.
Click in the
Sensitivity Control Dial
.
7.
Spin the
Sensitivity Control Dial
to the desired scale (Relative or Offset).
8.
Click the
Sensitivity Control Dial
to set.
9.
Press the
Yellow ENTER button
to exit.
Menu 32: dB offset value
This position is selected to set the
dB scale
for readings to be taken in
dB offset scale
.
To set the
dB offset scale
:
1.
Follow the steps to Enter the
Setup Mode
as described earlier.
2.
Spin to
dB Offset Val
(value) (Menu 32 blinks) and click in the
Sensitivity Control Dial
.
3.
The
dB Val (00)
will blink.
4.
Spin the
Sensitivity Control Dial
to the desired dB value level.
5.
Click the
Sensitivity Control Dial
to set.
6.
Press the
Yellow ENTER button
to exit.
Menu 33: Auto Store to CF
On Power Off the instrument will automatically download all records from the instrument to the Compact Flash Card.
YES
will set
the Auto Store feature. If
NO
is selected, if the power should fail (e.g. battery discharges) data will not be saved to the Compact Flash
Card.
To select this feature:
1.
Follow the steps to Enter the
Setup Mode
as described earlier.
2.
Spin to
Auto Store to CF
(Menu 33 blinks)
3.
Click in the
Sensitivity Control Dial
.
4.
Spin the
Sensitivity Control Dial
to YES or NO
5.
Click the
Sensitivity Control Dial
to set
Menu 34 Upgrade UP 10K PGM
This will be used for all future upgrades. This option enables users to upgrade firmware on-board the instrument using the Compact
Flash Card.
Please Note:
1. Be sure the instrument is fully charged before any Compact flash Card upgrade procedures.
2.
Do NOT
remove the Compact Flash Card during the upgrade process.
To Upgrade:
1.
Turn off
Ultraprobe
2.
Insert
Compact Flash Card
3.
Turn on
Ultraprobe
4.
Enter Setup mode
5.
Spin to 34 Upgrade UE 10K
6.
Click the
Sensitivity Control Dial
After the upgrade process the instrument will shut down and revert to all
Factory Default Settings
(see Menu 12: Default Settings)
click
dB Scale Select
Offset
spin
Menu
31
Select
dB
Scale
Select
Press ENTER to Exit
dB Scale Select
Relative
click
Menu
32
Select
dB Offset
Val
Press ENTER to Exit
dB Offset Val
dB VAL = (00)
